View FR01AR16HB-S_4436422.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

10mm DIP Rotaries
Series FR01
Distinctive Characteristics
Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Highly visible legends and choice of screwdriver, shaft or dial actuators with arrow position indication provide trouble-free code setting. Knob actuator also available.
Real or complement code setting identified by color-keyed actuator.
Detent mechanism gives crisp, positive action for accurate switch setting.
Crimped terminals ensure secure PC mounting and prevent dislodging during soldering.
Cam activated movable contact and gold contacts assure contact reliability and continuity.
Surface mount model with screwdriver actuation available and shown in the surface mount section.
Actual Size
Contact factory for custom models with .200" (5.08 mm) terminal spacing.
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
05-08
10mm DIP Rotaries
Series FR01
General Specifications
Electrical Capacity (Resistive Load)
Switching Rating: Nonswitching Rating: 100mA @ 5V DC 100mA @ 50V DC
Other Ratings
Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life:
Nominal Operating Torque: Contact Timing:
100 milliohms maximum for circuit; 30 milliohms maximum for contact point 1,000 megohms minimum @ 250V DC 250V AC minimum for 1 minute minimum 10,000 detent operations minimum 10,000 detent operations minimum Notes: A detent operation is one actuator position operation or stepping. A cycle is one 360 rotation. 10,000 detent operations equal 625 cycles for hexadecimal devices or 1,000 cycles for decimal devices. Metal Shaft: 0.009Nm for decimal devices; 0.011Nm for hexadecimal devices All other Actuator types: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices Shorting (Avoid possible false signal by turning off power before switching.)
Materials & Finishes
Actuators:
Bushing : Outer Case: Housing & Base: Movable Contacts: Stationary Contacts: Terminals: Terminal Cover: Bracket:
Screwdriver and Plastic Shaft - Glass fiber reinforced polyamide (UL94V-0); Dial - Polyoxymethylene; Metal Shaft - Brass with nickel plating Brass with nickel plating (for Metal Shaft model) Glass fiber reinforced PBT (for Metal Shaft model) Glass fiber reinforced polyamide (UL94V-0) Copper alloy with gold plating Phosphor bronze with gold plating Phosphor bronze with gold plating Polyamide (Right angle model only) Phospher bronze with tin plating (for Metal Shaft model)
Environmental Data
Operating Temperature Range: Humidity: Vibration: Shock:
-25C through +85C (-13F through +185F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering: Cleaning:
Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Custom process sealed version available; contact factory.
Standards & Certifications
Flammability Standards: UL Recognition or CSA Certification:
UL94V-0 rated actuator, housing and base The FR01 Series rotaries have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current circuit. When used as intended, the results do not produce hazardous energy.
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
05-08
10mm DIP Rotaries
TYPICAL SWITCH ORDERING EXAMPLE
Series FR01 S
PACKAGING
Stick-Tubes: FR01F, FR01K, FR01S 50 Pieces/Stick FR01A 25 Pieces/Stick
FR
MOUNTING
01 Through-hole
01
R C
K
CIRCUITS
R
16
P H
P
Straight Right Angle S
PC TERMINALS
Real Coded (Orange Actuator) Complement Coded (Yellow Actuator) Color not applicable to Actuator A
ACTUATION
F K S A Screwdriver Plastic Shaft Dial (for Straight Terminals only) Metal Shaft (for Optional Knobs)
POSITIONS
10 16 Decimal Hexadecimal B
BRACKET
With Bracket For Actuator A only
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
FR01KR16P-S
Plastic Shaft Hexadecimal Positions Packaged in Stick-Tube Real Coded Straight PC Terminals
MOUNTING 01
Through-hole
ACTUATION F
Screwdriver AT4180 Optional Snap-on Knob Polyamide Black knob with transparent flange
(9.6) .378 (2.1) .083 (0.8) .031 (4.0) .157 (0.8) .031 (1.1) .043
Adjusted with a flat tipped screwdriver
(6.7) .264
Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors: Orange for real coded devices; Yellow for complement coded devices.
Install knob before mounting on PCB for right angle type; it should not be removed once mounted. When mounting, align slit in knob with arrowhead on actuator.
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
05-08
10mm DIP Rotaries
ACTUATION K
Plastic Shaft
Series FR01
Metal Shaft
S
Dial
A
Adjusted by hand or with flat tipped screwdriver
Adjusted by hand or with flat tipped screwdriver
Knob options illustrated below with color choices
Actuators are fully rotational and operate either clockwise or counterclockwise. Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices Mounting hardware is available if needed for models with Actuator A: Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section.
OPTIONAL KNOBS FOR METAL SHAFT
AT433 Plain Black Material: Polyacetal Color: Black
(13.0) .512 (19.0) Dia .748 (11.0) Dia .433
AT4103 Small Color Tipped Polyester Base: Black
(9.5) .374 (16.0) Dia .630 (9.5) Dia .374
AT4104 Large Color Tipped Polyester Base: Black
(9.5) .374 (18.0) Dia .709 (11.0) Dia .433
Polyamide Tip Colors: A, B, C, E, F, G, H
(14.3) .563
Polyamide Tip Colors: A, B, C, E, F, G, H
(15.8) .622
(9.5) .374
(0.5) .020
(0.5) .020
(0.5) .020
Knob Orientation: When installed with shaft flat rotated 180 from bushing flat as shown in "Typical Switch Dimensions," white line on cap points to Actuator Position 0 noted in truth tables below. Color Codes: A Black B White C Red E Yellow F Green G Blue H Gray
TRUTH TABLES (CIRCUITS & POSITIONS)
Actuator Position x = ON Terminal No. (Output)
10 Decimal
16 Hexadecimal
01234567890123456789ABCDEF
1 R Real Coded
Model Numbers: FR01FR, FR01KR, FR01SR, FR01AR
2 4 8 1 2 4 8
Terminal numbers are actually on the switch. Above sequence shown for clockwise rotation.
C Complement Coded
Model Numbers: FR01FC, FR01KC FR01SC, FR01AC
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
05-08
10mm DIP Rotaries
TYPICAL SWITCH DIMENSIONS P
Straight PC * Screwdriver
(0.2) .008 (10.0) .394 (3.8) Dia .150 (10.0) .394
901
23
Series FR01
(0.2) .008 (10.0) .394 (3.8) Dia .150 (10.0) .394
(2.1) .083
(0.2) Typ .008 (7.62) .300 (3.3) .130
8 4 2 1
(2.54) Typ .100
1 2
C L
4 8
BCD
78
01 EF 2
(2.54) Typ .100 (7.62) .300
345
FR01FC10P
Decimal
Hexadecimal
H
Right Angle PC * Screwdriver
456
(0.2) .008 (3.8) Dia .150 (10.0) .394
(0.2) .008 (3.8) Dia .150 (10.0) .394 (3.25) .128
FR01FR10H
Decimal
Hexadecimal
P
Straight PC * Plastic Shaft
(0.2) .008 (10.0) .394
901
(0.2) .008 (10.0) .394
BCD
78
01 EF 2
(10.0) .394
(10.0) .394
FR01KR16P
Decimal
Hexadecimal
H
Right Angle PC * Plastic Shaft
(3.8) .150
456
(0.2) .008
(0.2) .008
(10.0) .394
FR01KC16H
Decimal
Hexadecimal
05-08
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
01 EF 2
901
(10.0) .394
(10.0) .394
345
23
89 67 A
(10.0) .394
01 EF 2
89 67 A
456
901
(10.0) .394
(10.0) .394
345
23
89 67 A
456
C
C
(3.8) .150
(0.5) Typ .020
(1.27) .050
(0.8 ~ 1.0) Dia Typ .031 ~ .039
(3.8) .150
89 67 A
(2.75) .108
1 2 C
C L
4 8
(2.54) Typ .100
BCD
78
(2.1) .083 (0.2) Typ .008 (2.54) .100 (3.3) .130
C 1248
(1.27) .050 (0.5) Typ .020 (2.54) Typ .100
(2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039
(2.1) .083
(0.2) Typ .008 (7.62) .300
8 4 2 1
(2.54) Typ .100
1 2
C L
4 8
(2.54) Typ .100 (7.62) .300
345
23
78
(3.8) .150 (3.3) .130 (7.0) (3.8) .276 .150
C
C
(0.5) Typ .020
(1.27) .050
(0.8 ~ 1.0) Dia Typ .031 ~ .039
(2.75) .108
1 2 C
C L
4 8
(2.54) Typ .100
BCD
(3.8) .150 (7.0) .276
(2.1) .083 (0.2) Typ .008 (2.54) .100 (3.25) .128 (3.3) .130
C 1248
(1.27) .050 (0.5) Typ .020 (2.54) Typ .100
(2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039
10mm DIP Rotaries
TYPICAL SWITCH DIMENSIONS P
Straight PC * Dial
(0.2) .008 (10.0) .394 (3.0) .118
123 4 5 67
Series FR01
(2.1) .083 (0.2) Typ .008 (7.62) .300
8 4 2 1
(2.54) Typ .100
1
C L
2 4 8
(2.54) Typ .100 (7.62) .300 (0.8 ~ 1.0) Dia Typ .031 ~ .039
(9.8) Dia .386
C
C
(10.0) .394
(3.4) .134
(1.27) .050 (7.2) .284 (3.3) .130 (0.5) Typ .020
FR01SR10P
Decimal
Hexadecimal
P
Straight PC * Metal Shaft
(3.1) Dia .122 (11.0) .433 (11.6) .457 (13.1) .516 (2.28) .090
Flat
(0.6) Typ .024 (7.62) .300
(2.54) Typ .100
8 4 2 1
(0.4) Typ .016
1
C L
2 48
(2.54) Typ .100 (7.62) .300 (0.8 ~ 1.0) Dia Typ .031 ~ .039
C
(0.2) Typ .008 (0.5) Typ .020
C
M6 P0.75 (10.0) .394 (6.1) .240 (11.95) .470 (3.3) .130 (12.7) .500
(1.27) .050 (12.7) .500
FR01AR10PB
Shown in Position 0 with shaft flat rotated 180 from bushing flat
H
Right Angle PC * Metal Shaft
(3.1) Dia .122 (11.0) .433
M6 P0.75
(0.4) Typ .016
C L
(2.54) Typ .100 (7.62) .300
(5.5) .217
C 12
48
1 C
2
4
8
(2.28) .090 (11.6) .457 (13.1) .516
Flat (0.6) Typ .024 (3.03) .119 (6.1) .240 (0.2) Typ .008 (2.54) .100 (3.3) .130 (12.7) .500 (0.5) Typ .020 (2.54) Typ .100
(10.0) .394
(7.62) .300 (13.9) .547
(1.27) .050 (12.7) .500
(2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039
FR01AC16HB
Shown in Position 0 with shaft flat rotated 180 from bushing flat
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
05-08
10mm DIP Rotaries
PACKAGING S
Stick-Tube
FR01F, FR01K & FR01S Each stick-tube contains 50 switches. Switches must be ordered in 50-piece increments. FR01A Each stick-tube contains 25 switches. Switches must be ordered in 25-piece increments. Note: Transport and storage temperatures should not exceed 50C (122F). Store stick tubes on flat surface.
Series FR01
FR01F with Screwdriver Actuation & Straight PC
FR01K with Plastic Shaft & Right Angle PC
(16.4) .646
(15.7) .618
(16.0) .630
(540.0) 21.260
(15.4) .606
(530.0) 20.866
FR01S with Dial Actuation & Straight PC
(13.9) .547
(12.3) .484
(528.0) 20.787
FR01A with Metal Shaft & Straight PC
FR01A with Metal Shaft & Right Angle PC
(18.2) .717 (35.5) 1.398 (33.6) 1.323 (390.0) 15.354
(13.1) .516
(390.0) 15.354
NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com
05-08

▲Up To Search▲

Price & Availability of FR01AR16HB-S

	To Download FR01AR16HB-S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .